VOYAGE CLEAR GOGGLES EYE PROTECTION

MECHANICAL STRENGTH                            MARKING

Increased robustness (12m/s)                           S

Low energy impact (45m/s)                               F

Medium energy impact (120m/s)                     B

High energy impact (190m/s)                            A

FIELD OF USE                                                 MARKING

Droplets & splashes of liquids                           3

Large dust particles                                             4

Gas & fine dust particles                                     5

Short circuit electric arc                                      8

Molten metals & hot solids                                 9

OCULAR MARKING

Scale number (filters only)

Identification of the manufacturer

Optical class

Symbol for mechanical strength

(where applicable)

FRAME MARKING

Identification of the manufacturer

The number of this standard

Field(s) of use (where applicable)

Symbol for resistance to high speed particles/

extremes of temperature (where applicable)

OPTICAL PERFORMANCE                                           MARKING

Optical class 1                                                                      1

Optical class 2                                                                      2

Optical class 3 (not intended for long term use)            3

Resistant to damage by fine particles                             K

Resistant to fogging                                                            N

DESIGNATION OF FILTERS                                                                        FILTER ID       SCALE

Welding filter                                                                                                        –              1,2 to 16

UV filter (Color perception may be impaired, unless marked 2C)               2             1,2 to 1,4

UV filter (good color recognition)                                                                     3             1,2 to 5

Infrared filter                                                                                                        4             1,2 to 10

Sunglare filter (without infrared specification)                                              5            1,1 to 4,1

Sunglare filter (with infrared specification)                                                    6            1,1 to 4,1

Note: Ocular markings will consist of the filter id, followed by the appropriate scale no.

CAUTION:

This eye protector is not suitable for protection against: High energy impact/Laser radiation/Infectious matter.

This PPE is not meant to be used, nor should it be used, in dangerous situations. No PPE offer full protection.

To reduce the risks associated with eye hazards which could result in serious injury or death, inspect the eye protector before each use. Replace immediately if there is any sign of damage including scratched lenses.

If protection against high speed particles at extremes of temperatures is required, then the selected eye protector should be marked with the letter T immediately after the impact letter, i.e. FT, BT, or AT. If the impact letter is not followed by the letter T, then the eye protector shall only be used against high speed particles at room temperature.

Whilst every effort is made to ensure that the materials which may come into contact with the wearer’s skin do not cause an allergic reaction, this may not be the case for a minority of susceptible individuals. In the event of such a problem occurring, stop wearing the eye protectors immediately and seek professional advice.

If the symbol F, B and A are not common to both the oculars and the frame, then it is the lower which shall be assigned to the complete eye protector. Eye protectors against high speed particles worn over standard ophthalmic spectacles may transmit impacts, thus creating a hazard to the wearer. Eyewear shall be transported and kept in the original packing, temperature range 5°-40°C, relative humidity<80%.

Each eye protector should be cleaned using a mild detergent of a suitable lens cleaner.

Please contact the customer service before using spare part.

Store eyewear in a dry area at room temperature and sheltered from sunlight.

Discard the product after 5 years.

This PPE meets applicable basic health and safety requirements of the European Regulation 2016/425 on personal protective equipment, as amended to apply in GB, and is marked in accordance with the tables below to identify its fields of use and performance as required under EN166:2001.